430 clutch disc assembly

Quick Details

Size: 430x230 bolt assembly aperture dosage and 12 * 11 explosion-proof type (Pei Dongfeng, FAW, Hongyan, Shaanxi, Chongqing) models: Yuchai YC6112, Cummings 6CT8.3, Weichai WD615, YC6112Z, WD615 models: the example of D6114, Steyr heavy vehicles, FOTON AUMAN 3208, EQ1242, EQ3242, EQ3242G, EQ3260, Hongyan CQ3260, CQ1190 series of Chunlan, Fukuda Shigeka, Dongfeng Tianlong 15 tons. Green steam 12 tons, 15 tons of heavy vehicles, North Benz, southwest cavalry, luxury bus (Yu Tong, Daewoo etc) more than the product information for reference note the use of
1, driven plate assembly should be kept clean, the friction plate must be dust, anti fouling, anti oil. Clutch assembly before the engine to the flywheel and pressure plate surface cleaning, remove the oil, to prevent slipping of the clutch. />2  , 3, & nbsp; & nbsp; & nbsp; in order to guarantee the stationarity of the clutch, clutch pressure plate assembly and a driven disc assembly factory has carried on the balance and use never arbitrarily demolition replacement parts. When the clutch is repaired, it must be disassembled. It is ready to be marked, then assembled and re balanced according to the original mark. < br />4, & nbsp; & nbsp; & nbsp; on the engine assembly or disassembly of the clutch, must be diagonal alternation and tighten or loosen clutch fixed on the flywheel bolts or nuts. />5  , 6  , 7  , 8, & nbsp; & nbsp; & nbsp; clutch in engagement state, separation bearing and the separation between the ring should maintain a gap of 2 ~ 3mm, ready to wear in the friction film, not hinder the platen compressing the friction piece to ensure reliable transmission of engine torque, normal work for a period of time, new car run 2 ~ 3, 000 kilometers, make up the insurance should be adjusted, after every 6000 kilometers do adjustment. />9  , 10 11, handling should be handled with care, can not throw touch. In handling, do not grasp the separation ring, so as not to cause the distortion of the torsion spring. />12 13