Cummings lubricating oil \ false one penalty ten \ super blue extreme lubricating oil

Quick Details

& nbsp; super extreme blue premium blue e products introduced "super extreme blue" lubricating oil is a high performance high quality heavy duty diesel engine lubricating oil, meet and comply with the United States, Europe, and Cummins Inc. the latest specifications. "Super extreme blue" lubricating oil can effectively protect the valve from wearing and greatly reduced production due to high temperature of the piston product carbon and soot related filter clogging. "Super extreme blue" lubricating oil certified by Cummins Inc., in a variety of car use, marine and industrial applications has superior performance. "Super extreme blue" lubricating oil is particularly suitable for use in the work in a variety of different conditions of modern low emission diesel engine. These engines including 2002 and later design and production with cooled exhaust gas recirculation (EGR) engine. Advanced technology to ensure the long-term service of the engine, and can prolong the oil cycle. & nbsp; professional specifications Cummins CES20071, 20072, 2006, 20077, 20078 the American Petroleum Institute API CI-4/CH-4/SL/SJ the European Automobile Manufacturers Association E-3, E-5, B3, A3 mark EO-M plus fertile and fertile VD S-2, VD S-3MAN 3275/271Global DHD-1 viscosity grade 15W-40 relevant national standards GB 11122-2006 performance characteristics of exergy & nbsp; quality class II base oil and unique DPT polymer differentiation technique, provides the excellent soot control and cold start protection. - system protection valve, effectively reduce the blocking of the oil filter in the case of high soot. - high temperature deposits improved control (including single piston and double piston), and piston ring / bearing wear protection. - total alkaloids of higher value to ensure the long-term operation of the engine, and prolong the period of oil. - in the laboratory and on the road have been through the exhaust gas recirculation (EGR) cooling Cummins engine test. & nbsp; for isx and ism, under different working condition of heavy load, load and light load, oil change intervals were extended to 32200, 56350, 724.5 kilometers. & nbsp; recommended application of exergy & nbsp; for in the exhaust gas recirculation (EGR) of various kinds of imported diesel engine driven all truck model. - also applicable to a variety of imported or domestic EGR is not equipped with diesel engine driven vehicle. - applies to the use of other new technologies to meet the emission regulations of the high speed four stroke diesel engine. - APICH-4, CG-4, can completely replace the use of CF-4, and better performance. & nbsp; & nbsp; the main technical characteristics of test items & nbsp; kinematic viscosity of SAE 15w-40 100 degrees Cmm2/s15.54 viscosity index & nbsp; 145 density at 20 degrees Cg/cm30.8705 total alkali value mgKOH/g10.5 low-temperature dynamic viscosity - 20 degrees CmPa.s5272 high temperature and high shear viscosity 150 DEG CmPa.s4.1 cryopump send viscosity - 25 degrees CmPa.s26300 flash point, the opening degree C224 pour point degrees c-33 above data for a typical value, this information may change at any time without prior notice. & nbsp; safety, health and environmental protection - & nbsp; please waste oil will be sent to the designated authorities of the recovery point, may not be discharged into the sewer, land and water. & nbsp; where the proposed used correctly, and to maintain good personal hygiene standards and labor protection measures, oil not to health and safety cause harm. & nbsp; avoid contact with skin, treatment of waste oil to wear insulating glove, once the oil on the stick to the skin to immediately with soap and water to clean.