Dongfeng Cummins clutch cover and pressure plate assembly

Quick Details

driven disc can also be called after the pressure plate is from the back to the clutch friction plate of a force, let the friction plate slightly forward and the driving disc (front platen, flywheel) pressed to transfer the power. Clutch control is the driven plate, and its front and rear moving to press and release the clutch friction plate, to achieve dynamic cutting and bonding. driven disc and the driven disc bydisc body, mainly composed of the friction plate and clutch disc hub. driven disc has the following main structure.






split elastic driven disc is riveted on the driven disc. Waveform spring, friction plate riveted on the wave spring sheet.
combined elastic driven disk
feature is near the side of a wave spring pressure plate riveting piece, close to the flywheel side did not.
either manual or automatic, change gear, need to temporarily disconnect the gearbox and the engine, the clutch is to finish the work. The dynamic role of


clutch is divided into three working status: full, full and half clutch separate. Not step the clutch pedal linkage is full; the clutch pedal foot in the end, the whole is separated; the clutch pedal part is half. Among them, half for starting and reversing linkage of short distance and some special conditions, such as gully, sediment, etc.. Half of the interlocking clutch plate wear is large, usually, only half. 1-2 minutes, you can smell the strong burning smell, although this does not affect driving, but often not linked half good driving habits. Someone stepped on the brakes before the total love to step on the clutch pedal, is a very bad driving behavior. Should avoid. In the right way, when the car is about to stop, just step on the clutch pedal.
clutch clutch type