Dongfeng Dana ABS disc brake gasket - Sheephorn axle steering knuckle assembly

Quick Details

The steering knuckle is one of the main parts of the automobile steering axle. The function of the steering knuckle is to bear the load of the front of the vehicle, and to support and drive the front wheel to rotate around the main pin. In the automobile driving state, it is under the changeable impact load, therefore, it has a very high strength. The steering knuckle is connected with the body through three bushes and two bolts, and the brake system is connected with the brake system through the brake mounting hole of the flange disc. When the vehicle is driving at high speed, the road surface is passed through the vibration of the steering knuckle, which is the main factor that we consider in the analysis. The calculation using existing vehicle model, the acceleration of gravity 4G is applied on the vehicle steering knuckle, calculate the three bushing center and two bolt mounting hole of the center point of the force as the applied load and constraints of all the nodes connected to the flange on the end surface of the brake system with 123456 degrees of freedom. Structural characteristics of the steering knuckle is more complex, focused on the structure of the shaft, sleeve, ring, fork and other parts of the structure of the four parts, mainly by the support of the shaft, flange, fork three parts. Shape bearing neck for stepped shaft, which is characterized by the outer cylindrical surface, conical surface, coaxial thread surface, rotational and axial line of vertical shaft, and the end of the transition fillet; connecting bolt flange comprises a flange surface, evenly distributed through holes and screw holes to limit the fork; from the steering knuckle of the upper and lower flange of ear and fork form "