Dongfeng Tianlong three damper driven disc assembly (Su auto structure)

Quick Details

specifications: 430*230*10 - 10* with a diameter of 50.8 mm, damping disc diameter of 212 (with Dongfeng. Shaanqi. Reynolds. Yuchai. Hongyan. Heavy. The liberation of new Eaton Williams models: main distribution box Aowei) 6DL series, BF6M10BECP, WD615.68Q8, DCI362 horsepower engine. OMM442, OMM441LA: CA4261P2K15T1, EQ4196, BJ4321 models, heavy Howard, North Benz, An Kai, Jinlong, Yutong, luxury touring car such as these products are for informational purposes only clutch notice of the use of
1, driven disc assembly should be kept clean, the friction plate must be dustproof, anti fouling, anti oil. Clutch assembly before the engine to the flywheel and pressure plate surface cleaning, remove the oil, to prevent slipping of the clutch. />2  , 3, & nbsp; & nbsp; & nbsp; in order to guarantee the stationarity of the clutch, clutch pressure plate assembly and a driven disc assembly factory has carried on the balance and use never arbitrarily demolition replacement parts. When the clutch is repaired, it must be disassembled. It is ready to be marked, then assembled and re balanced according to the original mark. < br />4, & nbsp; & nbsp; & nbsp; on the engine assembly or disassembly of the clutch, must be diagonal alternation and tighten or loosen clutch fixed on the flywheel bolts or nuts. />5  , 6  , 7  , 8, & nbsp; & nbsp; & nbsp; clutch in engagement state, separation bearing and the separation between the ring should maintain a gap of 2 ~ 3mm, ready to wear in the friction film, not hinder the platen compressing the friction piece to ensure reliable transmission of engine torque, normal work for a period of time, new car run 2 ~ 3, 000 kilometers, make up the insurance should be adjusted, after every 6000 kilometers do adjustment. />9  , 10 11, handling should be handled with care, can not throw touch. In handling, do not grasp the separation ring, so as not to cause the distortion of the torsion spring. />12 13