Howard product promotion WG9114160011/ pull large hole plate assembly

Quick Details

Parts name: pull large hole plate assembly / parts number: WG9114160011 application: heavy Howard, Shaanxi Auto accessories accessories brand origin: Hubei Shiyan: permanent Zhenxiang accessories category: specifications: 430x240 installation hole: 12 * 11.2 models: heavy Howard these products are for informational purposes only note the use of
1, driven disc assembly should be kept clean, the friction plate must be dust-proof, anti fouling and anti oil. The clutch on the engine assembly before the platen and the surface of the flywheel to scrub clean, remove the oil, to prevent slipping clutch. />2  , 3, to ensure a smooth clutch, clutch disc assembly and driven disc assembly factory has been used in the balance, not free replacement parts. When the clutch is repaired, it must be disassembled. It is ready to be marked, then assembled and re balanced according to the original mark.
4, assembly or disassembly on the engine clutch, clutch or alternating diagonal must be fixed on the matter to relax the flywheel bolt or nut. />5  , 6  , 7  , 8, the clutch is engaged, the separation between the bearing and the separating ring should be 2 ~ 3mm gap, to prepare for the friction wear of the case, not to interfere with the platen press friction piece, in order to ensure reliable transmission of engine torque, normal work after a period of time. The car runs 2 ~ 3 thousand km away, do insurance should be adjusted, after every six thousand km to make an adjustment. />9  , 10 11, handling should be handled with care, can not throw touch. In handling, do not grasp the separation ring, so as not to cause the distortion of the torsion spring. />12 13