Manual welding of Ito YT300EW self generating electric welding machine 300A

model:
whole
brand:
Ito dynamics
  • Product Details
  • Company Profile

Attribute

Not available

Quick Details

Manual welding self generating electric welder 300A









300A diesel generator welder YT300EW product label YT300EW insulation F rated frequency (HZ) 50 60 engine type rated power of R2V870 (KW) 3 engine type V type, double cylinder rated voltage (V) 230/240 four stroke, air-cooled rated current (A) 13/12.5 displacement (ML) 875 the number of single bore * stroke (mm) 88 x 72 power factor (COS phi) 1 compression ratio 20:01 (V) 45-60 welding no-load voltage rated power KW/ (r/min) 13/3000 rated welding DC power supply (A) 280 fuel type -35 (Yan Han) light diesel welding voltage 28-32-10# (winter) welding load 60%0# (Xia Tian) range of welding current regulation (A) 55-300 lubricating oil type SAE10W30 electrode (electrode) (mm) 2.0-6.0 fuel consumption rate (g/kw.h) = 280   = 300; rated speed (r/min) 3000/3600 fuel tank Capacity (L) 25 excitation self-excited (AVR) dimension (length * width * height) 870 x 630 x 800MM IG8T+ three-phase rectifier bridge rectifier net (kg) 239 brand Ito start electric power

/><br /><br / Ito YT300EW self generating electric welder   coal production cost in electricity consumption accounted for more than 8%, occupy the power consumption of the 60%~70%. In order to do a good job in the management of electricity consumption and reduce the consumption of electricity is not only to determine the efficiency of the development of the project, but also affect the image of the social project, the daily production management in the mine occupies a pivotal position. Since 2012, with coal prices fell sharply, the coal market continued to shrink, the group company issued a series of lowering the efficiency of the file, the electrical aspects of in-depth investigation and analysis, that the processing workshop power electric welder no-load operation problem is more prominent, with a BX1-500 type electric power welding machine as an example, the design in wire feeding system in 380 V<br /><br /><br / TMS320F240DSP digital signal processor, gives the system design, hardware and software design, and puts forward the application of Brushless DC motor drive system in electric welding machine at. Problems in safety and energy consumption of AC welding machine. This paper introduces the principle, characteristics and installation and operation methods of the AC welding machine. It is pointed out that the safety and energy saving device of AC welding machine can not only eliminate the safety hidden trouble, but also save a lot of electricity cost. Ito YT300EW from /><br / <br welder causes single-phase electric welding machine adopts single-phase induction meter disc inversion by the measurement of the phenomenon of power generation, because of the characteristics of single-phase electric welding machine, whether it is in the load load condition, there are 1 meter disc appeared reversal, this is normal. 2008, a period of all Chinese people are hard to forget the years; a period of history will be destined to leave a strong in the history of the years; a fire in the world of Chinese people have been sleeping for a long time of love</p>
                                    </div>
                                    
                                    
                                </div>
                                <!--Products end-->
                                <!--Suppliers start-->
                                <div class=

Company Name: Shanghai Yi Industrial Co., Ltd. transcripts
Business Type:
Send your message to this supplier
  • pengguiling
Verified Supplier:
shanghai,China (Mainland)
Business Type:

    You May Like: