The old King Kong Hongyan cab assembly

Quick Details

HOWO cab engine inspection: 1, first to check whether the engine because of other obstructions, open the engine hood. Look at the engine is not in the vicinity of the obstruction is relatively large, and pay special attention to the dust is the junction of the cylinder block and cylinder head, oil filter interfaces are not enabled the leakage, and can use the dipstick, check the oil inside the chassis is clean, whether the oil amount too much or too little (the best in two) 2, look at the Howard scale between the cab of the cooling liquid in the allowed amount between maximum and minimum values. 3, can be observed through the cold start of the general situation, smooth start time is 5 seconds, the ignition will not be more than two times, and after the start of the engine will not shake, sound. 4, when the engine speed changes should not be strong, and above the dashboard pointer case sensitive, so you can always monitor the engine, but if the engine suddenly accelerated and knock off the fire situation proves the problem. 5, Howard cab engine to try a variety of speed, finally to stable operation at 800mdash-900r/min for 10 minutes to 1 hours, to see whether the engine is stable, there is no noise or jitter. 6, exhaust vent can also explain the problem (and whether the relationship between oil burning full time should be normal), smoke (except steam environment when the air temperature is low), (hands on a tasteless, near the outlet and then watch the hands there is no oil. Smell or smell). 7, engine shutdown after a period of time, try a warm start, under normal operating temperature (60mdash degrees Celsius; 80 degrees) in the engine should be a successful start in 5 seconds.