Sign In|Join Free
Home > electric equipment>auto dynamo
  • Ultra quiet 2.5KW single phase gasoline generator portable
  • NUltra quiet 2.5KW single phase gasoline generator portable
  • NUltra quiet 2.5KW single phase gasoline generator portable

Ultra quiet 2.5KW single phase gasoline generator portable

model:
whole
origin:
Shanghai
brand:
Ito dynamics
Contact Supplier
  • Product Details
  • Company Profile

Attribute

Not available

Quick Details

Ultra quiet 2.5KW single-phase gasoline generator







2.5KW YT3000TM digital frequency conversion generator model YT3000TM grey dimensions 625*350*492 (mm) rated frequency 50 60 cases (mm) rated voltage size 650*385*540 (V) 230 120/240 net (kg34 rated current (A) 10 19.2/9.6 starting system recoil starter (hand) rated speed (r/min) 3600 fuel type automotive unleaded gasoline rated output (kVA) 2.4 oil SAE10W30 maximum output (kVA) 2.9 engine model special digital generator DC output 12V-830A   single cylinder four stroke engine model; phase single bore stroke 66X50 circuit breaker without displacement (ML) 171 the type of portable fuel capacity, compression ratio of 8.5 (L) 4.8 of the rated power [kW (Hp) (r/min) 3.3/3600 4.5HP in oil consumption (g/kW.h) 500 T.C.I (continuous operation time of ignition system HR) 8 spark plug F6RTC/WR7DC noise level dB (A) /7m 63-72 minimum fuel consumption (g/kW.h) 395
although difficult to buy bulk oil gasoline generators can be solved as pressing danger in Beijing and even the whole country, but to buy in bulk gasoline must be issued by the purchase application, and hold the ID card, to the local police station to open proof of purchase of oil and after the specified gas station to buy.

/><br /><br />2.5KW   single-phase gasoline generator; domestic gasoline generator mainly introduces calibration optimization engine control parameters. In the actual work, the engine is often in different conditions, in order to be able to carry out a more precise control, it is necessary to optimize the calibration. Domestic gasoline generator is divided into stable working conditions, transition conditions, starting conditions and introduces the basic calibration process, and on the basis of a large number of tests to obtain the results of the optimization calibration. Through the research of the original 465Q engine electric control injection system, the overall scheme of the new electronic control engine is designed, and the Map of the engine is made after the software and hardware design of the ECU is completed. The electronic control injection process of gasoline is realized by the whole system. This study provides a reference for the further improvement of the electronic control system of gasoline and methanol control system. <br /><br /><br />2.5KW   vehicle generator single-phase gasoline generator; according to the requirement of society for environmental protection and energy saving, combined with China's present situation of vehicle engine, aiming at a 4659 engine, based on the original control system, developed a set of electronically controlled multi-point fuel injection system. The system is mainly composed of air system, fuel system and control system. Through the intake pressure sensor, engine speed and crankshaft position sensor, temperature sensor, temperature sensor, solar term door position sensor and oxygen sensor and other components, the acquisition of various signals as inputs, according to previously stored in the memory of the ECU control parameters of pulse spectrum, the air-fuel ratio and ignition advance angle control. In the control process, the system according to the operating conditions of the engine, such as starting, idling, acceleration, deceleration and cruising mode, the control scheme and the corresponding work, to meet a variety of conditions on the air-fuel ratio and ignition advance angle of the different requirements. <br /><br: in this system, the packet at the same time multi-point injection, application of the distributorless ignition system ignition system of two cylinder at the same time, from the technical and cost, the system has the advantages of simple structure, reliable performance and low cost etc.. In the vehicle generator, the control unit ECU of the electronic control system is designed, and the MCS - 51 single chip microcomputer is used as the control unit. The hardware design includes the input signal processing, the master degree thesis of Taiyuan University of Technology, the input and output interface circuit, the microcomputer and the analog digital conversion circuit for data acquisition. The content of software design includes control program design, original data and data structure design. In addition, there is a display program and the outside world for data exchange, as well as the controller to accept the external control of the communication program design. The vehicle generator is mainly introduced.</p> </div> </div> <!--Products end--> <!--Suppliers start--> <div class=

Company Name: Shanghai Yi Industrial Co., Ltd. transcripts
Business Type:
Send your message to this supplier
  • pengguiling
Related Searches:
starter
auto dynamo
automobile lights
automobile instruments
automobile electronic control system
distribution box
automobile wiring harness
auto sensors
switch
relay
solenoid valve
controller
automobile horn
Motor
battery
auto audio
other electric equipments
You may also be interested in:
Verified Supplier:
Shanghai Yi Industrial Co., Ltd. transcripts
shanghai,China (Mainland)
Business Type:
Contact Details
Online Showroom:Products View this Supplier's Website

    You May Like: