With wheels YT6800T-ATS full automatic 5KW diesel generator 5 kW

Quick Details

Wheels YT6800T-ATS automatic 5KW diesel generator 5 kW

especially the sealing problem of the carburetor, must pay attention to. In actual use, the carburetor and cylinder contact plane or uneven gasket and adiabatic film rupture, at first glance is "small", the result is a result of "leakage" caused by the gas mixture into the cylinder, resulting in blasting and idling instability, and even difficult to start. The importance for sealing the carburetor gasoline generator work. This paper introduces a kind of electronic speed control system used in small general gasoline generator. The working principle of controller of small gasoline generator operation frequency and operating frequency for calibration PI proportional integral operation, pulse current to drive stepper motor operation and control the direction and step of opening so as to adjust the carburetor solar term door, meet the needs of small gasoline generator in the condition of different load speed stability requirements.


5KW automatic diesel generator YT6800T-ATS artikelnummer YT6800T-ATS engine model LD186FA frequency 50HZ displacement of 0.418 rated power 5KW fuel volume 16L 5.5KW maximum output power consumption of about 283g DC output rated voltage of 1.65 230V 12V oil volume structure static sound trolley starting electric starting size (MM) 840*520*680 phase single-phase net / gross weight (KG) 169kg brand Ito power cooling and forced air cooling


online brand name: Ito
; on the product with 17%, does not include freight, the 24 hours of delivery.

YT6800T-ATS automatic 5KW   diesel generator; single cylinder motor drive mode under high speed starting first cycle test is based on the four cylinder engine, through the engine (install high speed, at the same time to start motor) MCU control system based on a single cylinder test cylinder ignition and combustion, analysis of this engine in the engine, fuel injection quantity, different starting conditions related to the combustion speed of the cylinder and emissions, as the engine idling start stop to develop and provide the actual data support optimization strategy.